Tuesday, 14 August 2018

10 Dos and Don’ts for Mastering Your Tripod

Love ’em or hate ’em, tripods are an essential piece of gear for all photographers. It will keep your camera steady during long exposures, support the weight of those big lenses you need for wildlife photography, and hold your camera in what could otherwise be an awkward position for macro photography.

But just like any other tool, a tripod can be used the right way, and the wrong way.

10 Dos and Don'ts for Mastering Your Tripod - photographer under a rock arch

DO – Get a good tripod that fits your gear

First of all, make sure your tripod is sturdy and solid. There are a wide variety of models available that range anywhere from $20 on into the thousands, and there is a reason for that. A bargain tripod will hold a small point-and-shoot camera steady but is not strong enough to keep your heavy DSLR steady during a long exposure.

Even if you have a high-quality tripod, there are still some things to consider such as its weight limit and maximum height. Make sure your tripod is built to hold the weight of your camera, biggest lens, flash, and any other accessories you might put on it.

You might also want to consider if your tripod should be as tall as you are. If you need to look through your viewfinder, having a tall tripod will mean you can use it more comfortably without bending down. On the other hand, if you have an LCD screen that flips up, a tall tripod is less important.

A good tripod should last decades with proper storage and care, so it’s worth the investment.

photographer on sand dunes - 10 Dos and Don'ts for Mastering Your Tripod

DO –  Make sure your tripod is sufficiently weighted

The weight of the tripod itself is also something to think about. Typically they are made from aluminum which is relatively inexpensive but heavy. For a higher price, you can get one made of carbon fiber, which is strong and lightweight but more expensive.

A carbon fiber tripod is an excellent choice for nature and wildlife photographers who have to walk or hike long distances while carrying their gear. However, they are so light that a stiff breeze could potentially knock the tripod over, taking your camera with it. If you are using a lighter tripod and there is a lot of wind, anchor the legs of the tripod or hang a rock, sandbag, or your camera bag from the center to weigh it down.

I recommend going for a light tripod otherwise it will tend to get left at home. A light tripod is easy to carry and you can always weigh it down on a windy day.

sunset over Canyon de Chelly, Arizona - 10 Dos and Don'ts for Mastering Your Tripod

DO – Extend the thickest sections of the legs first

When a tripod folds up, its legs unlock and collapse into sections (usually three or four). The thickest sections of the leg are the most stable. So if you’re not raising your tripod to full height, extend the thicker upper sections before you bring the thinner lower parts into play.

DON’T – Raise the center column until the legs are fully extended

Raising the tripod using the legs offers much more stability than using the center column, which can sway slightly during long exposures. For maximum sharpness, the center column should be used to gain extra height only after the legs are fully extended.

DO – Remove the center column altogether

Consider whether you are more likely to require additional height, or if you would rather be able to get lower to the ground. Some tripods allow you to remove the center column, which means you can set up your tripod lower to the ground for super low-angle shots.

Gatklettur, or Arch Rock, in Arnarstapi, Iceland - 10 Dos and Don'ts for Mastering Your Tripod

DON’T – Touch the tripod or camera during the exposure

If you’re doing a long exposure, even a slight nudge on the tripod can cause blur. Make sure that nothing touches the camera or tripod while the shutter is open. A camera strap blowing in the wind comes to mind.

Ideally, you should use a remote shutter release or 2-second self-timer to prevent movement when you press the shutter button.

DON’T – Carry your camera mounted on the tripod

Okay, I have to admit I’m guilty of this one! It can be tempting to leave your camera attached to the tripod as you walk from location to location – it makes set-up and take-down so much faster when you need to get the shot.

But the release plates and screws that hold the camera to the tripod assume that gravity will be working with them. They aren’t built to hold the camera at an angle, especially with the bustling and bumping that can happen while walking around outside. By doing this, you risk your precious camera coming loose and taking a bad spill.

DO – Protect your tripod from water, sand and other debris

A good tripod should be fairly rugged, but tiny particles can get inside the tripod and erode the screws that make it move smoothly and fasten securely. Avoid submerging the joints and locks in sand or silty water, and if your tripod does get dirty, make sure it is clean and dry before folding it back up.

I often use my tripod on the beach and sometimes submerge it in salt water. A solution to the problem of getting sand and salt in the tripod is to not collapse it again. I just leave all the legs extended until I get home (or to home base if traveling) and can rinse it off.

Hraunfosser Waterfall, Iceland - 10 Dos and Don'ts for Mastering Your Tripod

DON’T – Over-tighten the screws

Some tripods have spinning screw locks that tighten the legs, and some fasten with clips that are held on with bolts that may need to be adjusted from time to time.

Either way, you want these screws to be secure enough, but you don’t want to muscle them so tight that they can’t be unlocked. Worse, you could strip and damage the threads. Most screws on a tripod should be firmly finger-tight, and no more.

DO – Turn off image stabilization

The image stabilization technology inside cameras and lenses is fantastic when hand-holding the camera, but can actually backfire when used on a tripod.

This is because the stabilization system itself causes vibrations, and when it’s mounted on a stable base such as a tripod, it actually detects its own vibration. It works harder to stabilize this, which causes it to vibrate, even more, compounding the problem.

Therefore, this setting should be turned off when your camera is mounted on a tripod.

10 Dos and Don'ts for Mastering Your Tripod - photographer in a desert valley

Over to you

There’s nothing worse than making a big investment in your photography only to find it isn’t helping very much. So make sure you are using your tripod properly to get those sharp images you are after.

The post 10 Dos and Don’ts for Mastering Your Tripod appeared first on Digital Photography School.



from Digital Photography School https://digital-photography-school.com/10-dos-donts-for-mastering-your-tripod/

No comments:

Post a Comment